Partial pendulum tester
Specifications / Features
Partial pendulum tester is mainly used to detect the axis class, the disc type of the other parts of the radial, round and round beating beating, product design is novel, beautiful and generous, high precision, easy to operate.Main technical parameters of the partial pendulum tester:
1, Morse No. 2 top 60 cone face radial Morse taper circular runout is less than or equal to 0.005mm.
2, the top line in the range of 1000mm to guide the parallelism (horizontal and vertical) less than 0.006mm.
3, the measured part of the maximum diameter of 270mm-50mm.
4, measuring the length of 300mm, 500mm, 1000mm, 1500mm, 2000mm.
Offset pendulum gauge (mm):
| type | Center height(mm) | OD (mm) | accuracy | |
| Parallel direction(μm) | vertical direction(μm) | |||
| 2010 | 100 | ≤170 | ≤8 | ≤5 |
| 3017 | 170 | ≤270 | ≤8 | ≤5 |
| 5017 | 170 | ≤270 | ≤8 | ≤5 |
| 5025 | 250 | ≤460 | ≤8 | ≤5 |
| 5030 | 300 | ≤560 | ≤8 | ≤5 |
| 10017 | 170 | ≤270 | ≤10 | ≤8 |
| 10025 | 250 | ≤460 | ≤10 | ≤8 |
| 10030 | 300 | ≤560 | ≤10 | ≤8 |
| 20025 | 250 | ≤460 | ≤30 | ≤20 |
| 20030 | 300 | ≤560 | ≤30 | ≤20 |
